Mozgásvezérlők - Motion Controller

A Yaskawa cég nagy múltra tekint vissza a mozgás vezérlők vagy idegen néven Motion Controllerek gyártása területén. A Yaskawa már a 80-as években fejlesztett Motion controller-eket CNC gépek vezérléséhez, melyek Yasnac néven terjedtek el. A vezérlések fejlődésével egyre több típust fejlesztettek, melyek napjainkra biztos alapját képezik a több tengelyes szervóhajtások vezérlésének az ipar szinte minden területén.
MP3300iec_Yaskawa.png

MP3300 IEC

MP3300iec is a compact machine controller with 4, 8 or 20 axes of synchronized control.
IEC Programming Environment and Controller-Centric Commissioning using MECHATROLINK-III motion network

One software platform

 

    • MotionWorks IEC, allows efficient programming and handling of applications within a standard IEC 61131-3 environment
    • Advanced camming and gearing functions
    • The MECHATROLINK-III open Ethernet based motion network (100 Mbps) enables machine configuration from a single location with one software tool. Using self-tuning abilities of a servo system commissioning time is greatly reduced.
    • Open standards EtherNet/IP and Modbus TCP to connect to many HMI and PLC in the market
    • The controller can operate local amplifier outputs. This reduces panel cost and space requirements when just a couple of outputs are necessary.
    • Libraries enable importation of previously developed logic

 

A Multitude of Options
Choose from ten option cards offered for the expansion slot to accommodate most machine requirements.

MP3200 IEC

62 Axes Machine Controller with IEC Programming Environment and Controller-Centric Commissioning using MECHATROLINK-III motion network

 

  • One software platform, MotionWorks IEC, allows efficient programming and handling of applications within a standard IEC 61131-3 environment
  • MP3200iec offers higher axis counts and faster update rates: 62 axes of synchronized control
  • PLCopen Function Blocks in MotionWorks IEC simplify programming
  • Advanced camming and gearing function
  • The MECHATROLINK-III open Ethernet based motion network (100 Mbps) enables machine configuration from a single location with one software tool. Using self-tuning abilities of a servo system commissioning time is greatly reduced.
  • Diagnostic Web server reduces field maintenance time
  • Optional OPC server provides HMI connectivity or Data Acquisition
  • Communication Protocols: Open standards EtherNet/IP and Modbus TCP to connect to many HMI and PLC in the market
  • Programmable Amplifier Outputs: The controller can operate local amplifier outputs. This reduces panel cost and space requirements when just a couple of outputs are necessary.
  • Reusable Code: Libraries enable importation of previously developed logic.
  • A Multitude of Options: Choose from ten option cards offered for the expansion slot to accommodate most machine requirements.
MP3200iec_Yaskawa.png
MP2600_iec_Yaskawa.png

MP2600 IEC

Small size and powerful controller option for Sigma-5 SERVOPACKs.

 

  • 1.5 axis control
  • Open standards EtherNet/IP and Modbus/TCP
  • IEC61131-3 programming standard for efficient software handling
  • PLCopen Function Blocks in MotionWorks IEC simplify programming
  • Reusable Code – Libraries enable importation of previously developed logic
  • Optional OPC server provides HMI connectivity or Data Acquisition
  • Sigma-5 autotuning and vibration suppression algorithms provide easy setup
  • Wide product range of Sigma-5 (230/480 VAC from 50 W to 15 kW) allows flexible designs

MP2310 iEC

Number of controlled axes:
4-8-16 axes

 

 

  • Communication Protocols – Open standards EtherNet/IP and Modbus/TCP to connect to many HMI and PLC in the market.
  • Standard Programming Languages – IEC61131-3 standard for efficient software programming and handling
  • PLCopen Function Blocks – YASKAWA developed the Motion Control interface MotionWorks IEC to comply with PLCopen "standard"
  • Programmable Amplifier Outputs – The controller can operate local amplifier outputs. This reduces panel cost and space requirements when just a couple of outputs are necessary.
  • Reusable Code – Libraries enable importation of previously developed logic.
  • Controller-Centric Commissioning – The MECHATROLINK motion network enables machine configuration from a single location with one software tool. Using self-tuning abilities of a servo system commissioning time is greatly reduced.
  • A Multitude of Options – Choose from ten option cards offered for the expansion slot to accommodate most machine requirements
ments.
MP2310iec_Yaskawa.png
MP2300S_iec_Yaskawa.png

MP2300 SiEC

Number of controlled axes:
4-8-16 axes

 

 

  • Communication Protocols – Open standards EtherNet/IP and Modbus/TCP to connect to many HMI and PLC in the market.
  • Standard Programming Languages – IEC61131-3 standard for efficient software programming and handling
  • PLCopen Function Blocks – YASKAWA developed the Motion Control interface MotionWorks IEC to comply with PLCopen "standard"
  • Programmable Amplifier Outputs – The controller can operate local amplifier outputs. This reduces panel cost and space requirements when just a couple of outputs are necessary.
  • Reusable Code – Libraries enable importation of previously developed logic.
  • Controller-Centric Commissioning – The MECHATROLINK motion network enables machine configuration from a single location with one software tool. Using self-tuning abilities of a servo system commissioning time is greatly reduced.
  • A Multitude of Options – Choose from ten option cards offered for the expansion slot to accommodate most machine requirements

MP2400 iEC

Compact simplified Machine Controller

 

 

  • Small footprint and reduced wiring
  • MECHATROLINK and Ethernet (100 Mbps) communications are available
  • Sequence and motion control with easy programming (no ladder program)
  • Tool designed for use with the MP2400 (MPE720 Ver. 6 Lite) is provided at no charge
  • Motion control of 16 axes
MP2400iec_Yaskawa.png
MP2200iec_Yaskawa.png

MP2200 iEC

  • Optimal system can be created with a variety of optional modules for motion control, communications and I/O
  • Expanded capability with 4 additional racks with 9 slots per rack
  • Motion control up to 256 axes
  • CPU module (CPU-01/CPU-02) for the MP2200 can be used to realize a high-speed motion control cycle of 0.5 ms
  • 1 to 256 axis

MP2100 iEC

Number of controlled axes:MP2100: 1 to 16 axes

 

  • Motion programs can be easily made on your personal computer with 51 motion application program interfaces (APIs)
  • Motion APIs are available to realize motion control using your industrial personal computer (IPC)
  • Motion network MECHATROLINK (10 Mbps) as a standard feature
MP2100_Yaskawa.png
MP2100_Yaskawa.png

MP2100M iEC

  •  Number of controlled axes:
    MP2100: 1 to 16 axes
    MP2100M: 1 to 32 axes

    • Motion programs can be easily made on your personal computer with 51 motion application program interfaces (APIs)
    • Motion APIs are available to realize motion control using your industrial personal computer (IPC)
    • Motion network MECHATROLINK (10 Mbps) as a standard features